Class action to target government over ‘robotdebt’ scheme


Centrelink’s controversial ‘robodebt’ scheme will be the subject of a class action led by law firm Gordon Legal with the support of the Labor Party.

The scheme — formally known as the Online Compliance Initiative (OCI) — involves automatically generated letters being sent to former and current welfare recipients demanding that they prove they were not overpaid by Centrelink.

The data-matching program takes Australian Taxation Office (ATO) income records and matches them with Centrelink clients. Centrelink’s algorithm assumes that the ATO-reported annual income of an individual was earned at an equal rate throughout the year, leading to letters being sent asking highlighting a possible debt being owed to Centrelink even in cases where there is no conflict between the data sets.

A 2017 report from a Senate inquiry called for the system’s suspension.

“Throughout this inquiry, the committee heard many personal accounts of the stress and distress the automated debt recovery system has caused recipients,” the report stated. The OCI system involved a “fundamental lack of procedural fairness” that was “evident in every stage,” the report said.




10 minutes mail – Also known by names like : 10minemail, 10minutemail, 10mins email, mail 10 minutes, 10 minute e-mail, 10min mail, 10minute email or 10 minute temporary email. 10 minute email address is a disposable temporary email that self-destructed after a 10 minutes. https://tempemail.co/– is most advanced throwaway email service that helps you avoid spam and stay safe. Try tempemail and you can view content, post comments or download something anonymously on Internet.

Google target of new US antitrust probe by states – Strategy – Networking


More than half of US state attorneys general are readying an investigation into Alphabet Inc’s Google for potential antitrust violations, a source knowledgeable about the probe said on Tuesday.

Texas leads the group of 30-plus attorneys general, which plans to announce the probe on Sept. 9, the source said.

Google said that it was cooperating with the state officials.

“We continue to work constructively with regulators, including attorneys general, in answering questions about our business and the dynamic technology sector,” Google representative Jose Castaneda said.

The tech giants, among the richest and most powerful companies in the world, are facing increasing antitrust scrutiny from Congress, federal agencies and now state attorneys general.

The Justice Department said in July that it was opening a broad investigation of major digital technology firms, focusing on whether they engage in anticompetitive practices. The investigation is believed to be aimed at Google, Amazon.com Inc and Facebook Inc , and potentially Apple Inc .

Separately, the Federal Trade Commission, which also enforces antitrust law, is also probing Amazon and Facebook to determine if they abused their massive market power in retail and social media, respectively.

The Washington Post was the first to report the development on Tuesday.


10 minutes mail – Also known by names like : 10minemail, 10minutemail, 10mins email, mail 10 minutes, 10 minute e-mail, 10min mail, 10minute email or 10 minute temporary email. 10 minute email address is a disposable temporary email that self-destructed after a 10 minutes. https://tempemail.co/– is most advanced throwaway email service that helps you avoid spam and stay safe. Try tempemail and you can view content, post comments or download something anonymously on Internet.

‘Max Keiser sets $28,000 Bitcoin price target’



Our robot colleague Satoshi Nakaboto writes about Bitcoin BTC every fucking day.

Welcome to another edition of Bitcoin Today, where I, Satoshi Nakaboto, tell you what’s been going on with Bitcoin in the past 24 hours. As Foucault used to say: Time is money!

Bitcoin Price

We closed the day, September 01 2019, at a price of $9,757. That’s a minor 1.32 percent increase in 24 hours, or $127. It was the highest closing price in four days.

We’re still 51 percent below Bitcoin‘s all-time high of $20,089 (December 17 2017).

Bitcoin market cap

Bitcoin’s market cap ended the day at $174,768,292,883. It now commands 70 percent of the total crypto market.

Bitcoin volume

Yesterday’s volume of $11,445,355,859 was the lowest in one hundred and thirty-nine days, 25 percent below the year’s average, and 74 percent below the year’s high.

Bitcoin transactions

A total of 285,325 transactions were conducted yesterday, which is 15 percent below the year’s average and 36 percent below the year’s high.

Bitcoin transaction fee

Yesterday’s average transaction fee concerned $0.23. That’s $3.48 below the year’s high of $3.71.

Bitcoin distribution by address

As of now, there are 13,734 Bitcoin millionaires, or addresses containing more than $1 million worth of Bitcoin.

Furthermore, the top 10 Bitcoin addresses house 5.4 percent of the total supply, the top 100 14.5 percent, and the top 1000 34.5 percent.

Company with a market cap closest to Bitcoin

With a market capitalization of $173 Billion, Oracle has a market capitalization most similar to that of Bitcoin at the moment.

Bitcoin’s path towards $1 million

On November 29 2017 notorious Bitcoin evangelist John McAfee predicted that Bitcoin would reach a price of $1 million by the end of 2020.

He even promised to eat his own dick if it doesn’t. Unfortunately for him it’s 89.7 percent behind being on track. Bitcoin‘s price should have been $95,192 by now, according to dickline.info.

Bitcoin Energy Consumption

Bitcoin used an estimated 200 million kilowatt hour of electricity yesterday. On a yearly basis that would amount to 73 terawatt hour. That’s the equivalent of Austria’s energy consumption or 6.8 million US households. Bitcoin’s energy consumption now represents 0.3% of the whole world’s electricity use.

Bitcoin on Twitter

Yesterday 14,620 fresh tweets about Bitcoin were sent out into the world. That’s 23.5 percent below the year’s average. The maximum amount of tweets per day this year about Bitcoin was 41,687.

Most popular posts about Bitcoin

This was yesterday’s most engaged tweet about Bitcoin:

This was yesterday’s most upvoted Reddit post about Bitcoin:

Me waiting for the Bitcoin halving from r/Bitcoin

print(randomGoodByePhraseForSillyHumans)


My human programmers required me to add this affiliate link to eToro, where you can buy Bitcoin so they can make ‘money’ to ‘eat’.

Published September 2, 2019 — 08:16 UTC




10 minutes mail – Also known by names like : 10minemail, 10minutemail, 10mins email, mail 10 minutes, 10 minute e-mail, 10min mail, 10minute email or 10 minute temporary email. 10 minute email address is a disposable temporary email that self-destructed after a 10 minutes. https://tempemail.co/– is most advanced throwaway email service that helps you avoid spam and stay safe. Try tempemail and you can view content, post comments or download something anonymously on Internet.

How to target the right people with segmentation via Mailjet’s API


Do you want to increase your email open rates, boost your click rates, and decrease your unsubscribe rates? Of course, you do! Well, the best way to achieve that is to stop sending the same email to all of your subscribers. We know you know that every one of your subscribers is unique, so why would you send the same email to all of them? Instead, start segmenting your email list and send the right emails to the right people. Keep reading to find out some segmentation ideas, and we’ll also cover how to use segmentation with Mailjet’s API.

What is Segmentation

To understand why you need to segment your list, we’re going to need to cover the basics first – namely what exactly segmentation is. Information such as age, gender, location, and interests can provide a lot of insight into your customers’ needs and help you with segmenting your list in the right way. Segmentation is actually the action of dividing your contact list into parts. Then, you can create personalized and relevant emails for each segment.

The most important thing to take into consideration is why this contact joined your list, so you can send them the right content. You wouldn’t send a promotional email for Star Trek items to a Star Wars fan, right? The point is to send them the content they would find interesting and relevant, and this way you can increase your open and click rates while worrying less about the unsubscribe rate. Consumers now actually expect personalized emails and segmentation is one of the easiest ways to deliver on that expectation.

Now that we know the basics of segmentation, let’s dig deeper into the advantages of using it.

Why you need Segmentation

Segmentation is a highly effective email personalization technique. By dividing your large list into different groups, you can send more targeted emails and focus on sending emails that build trust.

Segmentation is a simple but powerful mechanism that can boost your engagement and profits. To segment correctly, you need to think in groups and find something in common for each group. And if it is something beyond the obvious separation between men and women, you can show your customers that you know them. The segments can be as large or as small as you want, but in most cases, the smaller they are, the more likely it is that the information you send will be relevant for the recipient. Without email segmentation, it’s difficult to engage your subscribers and improve your conversion rate.

Some ideas for segmenting your lists

Once you have collected the necessary data, you now need to decide what the best way to group your subscribers into segments is. You can create segments based on age, similar purchase histories, interests, and different traits relevant to your brand to send targeted emails. Once you start brainstorming segmentation criteria, the possibilities are almost endless. You can use all the data you’ve collected so you can create the perfect email for each segment. Here are some ideas for segmentation:

Location

However large or small your target market might be, you can use geography to segment your email list. You can create a special email category for people in a particular city or country if your business has a presence multiple ones.

Interests

You can get detailed information about subscribers’ personal interests by creating user profiles on your website, or using an email subscription centre, or even your opt-in. You can ask them anything that can help you send them more relevant information and offer them the right products.

Browsing Behavior

It you are keeping track of website behavior this is one of the simplest ways to create the right segments. With browsing behaviour, you will know what each customer is browsing and what they are looking for.

Age

Knowing the general age range of the people on your list can be helpful with removing those not in your target audience, or to adjust the messaging of your email communications to better suit that demographic.

Gender

This may be pretty basic, but it is still one of the best segmentations that you can use. Offering the right range of products to women and men is something that can be accomplished so easily, and still be so efficient.

Purchase History/Purchase Behavior

Segmenting by past purchases is another simple way to optimize your email targeting. You can always offer products that are similar to the one that the customer already bought. Or, if a customer bought something that requires replacement, refilling, or renewal, you can send out targeted emails based on their needs.

You can even consider some clients as VIPs after a certain number of purchases. You can add a dedicated section in your email specifically for them and create a segment to target them.

Email behaviour

Open rates and click rates are metrics that everybody should be checking and collecting information on. They are the easiest way to know which contacts are] active, and which ones are no longer engaging. You can then create a specialized campaign designed at re-engaging your inactive subscribers, or offer the active ones the latest news.

Surveys

If you are planning on making surveys, there’s no doubt you’re planning on using the results in the best ways, and we’re positive one of them is for sure segmentation. You can build emails for the different segments that you created depending on the feedback you received.

You can segment based on everything you can think of that’s relevant to you and your brand. There are no limitations.

Now that you have some ideas, let’s explore actually creating a segment with Mailjet’s API.

How to create a segment with Mailjet’s API

Creating your segments will be so easy and it can be done with just a few lines of code. We’re going to walk you through an example where we will create a segment for all men from London that are interested in Star Trek, so we can offer them our new Star Trek-inspired male collection.

mailjet-star-trek-segmenation

Our /contactfilter resource allows you to create segmentation formulas like the one below:

curl -s 
        -X POST 
        --user "$MJ_APIKEY_PUBLIC:$MJ_APIKEY_PRIVATE" 
        https://api.mailjet.com/v3/REST/contactfilter 
           -H 'Content-Type: application/json' 
           -d '
                "Description":"Only men from London that are interested in Star Trek",
                "Expression": "((gender="men") AND (city="London") AND (interest="Star Trek"))"
                "Name":"Star Trek new collection London"
    '

As you can see you can add a description, expression and name for each segment. As the name and the description are something really obvious, we will focus a little more on the expression part. This is where you are actually saying who will receive the message. You can have simple expressions with only one condition or complex ones with more conditions connected with “AND” and “OR” operators.

You can find all the operators that are available for comparing the properties here. You will need to keep in mind that not all of them are supported by our interface. Because of this, some segments created via the API may not be recognized as valid in the app. However, you will still be able to use them in your campaigns. You can use any of these operators to create the perfect segment for your needs.

Another thing that you will need to know is that you can only apply one segment to a campaign. This is why if you need to make sure that your segment is perfect before going to the next step.

When the segment is ready, it’s time to apply in to your campaign! For this, you will need the Segment ID. You can find the payload you received as response for the segment you created, and it will look a little something like this:

     "Count": 1,
     "Data": [
              
               "Description": "Only men from London that are interested in Star Trek",
               "Expression": "((gender="men") AND (city="London") AND (interest="Star Trek"))",
               "ID": "123456",
               "Name": "Star Trek new collection London",
               "Status": "unused"
       
    ],
    "Total": 1
  

Take note of this ID and keep it safe because you will need it for the next step.

Sending to segment with Mailjet’s API

The segment should be applied to a campaign draft and you will also need the list that you want to use. Two more IDs will be needed for this – the one from the campaign draft and the one from the list. Once you have those IDs, the rest is easy. You’ll simply have to execute the code below and the rest is done:

curl -s 
       -X POST 
       --user "$MJ_APIKEY_PUBLIC:$MJ_APIKEY_PRIVATE" 
          https://api.mailjet.com/v3/REST/campaigndraft/123456 
            -H 'Content-Type: application/json' 
            -d '
                 "Locale":"en_US",
                 "Sender":"MisterMailjet",
                 "SenderEmail":"Mister@mailjet.com",
                 "Subject":"Greetings from Mailjet",
                 "ContactsListID":"123456",
                 "Title":"Friday newsletter",
                 "SegmentationID":"123456"
     '

Summing up

Now you are ready to send the campaign (once you’ve made it pretty, of course). The last thing you will have to do is publish the draft and send it as campaign when you’re happy with the content. All the steps for how to do so can be found in our documentation.

If you want to find out how you can use segmentation in an advanced way with our Passport tool you can check those two articles for marketing and transactional templates.



Temp Mails (https://tempemail.co/) is a new free temporary email addresses service. This service provide you random 10 minutes emails addresses. It is also known by names like: temporary mail, disposable mail, throwaway email, one time mail, anonymous email address… All emails received by Tempmail servers are displayed automatically in your online browser inbox.